压纹纸张表面有点深浅处理办法

Embossed paper surface a bit shallow treatment

第一，在灰纸板压制的时候，在灰纸板表面喷一点点水，或者用潮湿抹布轻轻拍打灰纸板，让灰纸板有一点水汽之后多次反复压制，然后让灰纸板更加密实，主要是因为灰纸板本身密度有差异，在长时间压制之后会出现深浅

First, when pressed in gray cardboard, gray cardboard surface spray a little water, or with a damp cloth gently grey board, then let a little gray cardboard moisture repeatedly pressed, and then let the gray cardboard more dense, mainly because of the density difference of gray board itself, after a long time pressing depth will appear

第二，在压制灰纸板之后可以在深压纹部分（也就是最高点位置，或者深纹位置）滴一些502，让502胶水自己渗透进灰纸板，待干燥之后会很硬，这样压制深纹效果会更加好

Second, after the suppression of gray cardboard can in deep embossed part (which is the highest point of location, location or deep lines) drops some 502, let his 502 glue penetrate into gray cardboard, to be dried after be hard pressed so deep lines would be better

第三，还可以将报废的胶印机橡皮布铺盖在灰纸板表面，这样对于局部细纹效果会好很多（注意，橡皮布不要有明显伤痕，橡皮布反面纱布层要剥离，），这样做会好很多，如果整版面都是细纹路的话可以直接铺橡皮布生产。

Third, can also be scrapped printing machine blanket blanket on the surface of gray cardboard, so the local fine effect will be much better (note that the blanket do not have scars, blanket negative gauze layer to peel off, it will be much better), and if the whole pages are fine lines of the road can be directly laid blanket production.