1.试生产时最好低速运行，待熟悉机器性能后，可逐渐提高生产速度，如此可较好地保证生产安全和产品的压纹质量。

1., it is better to run at low speed in trial production. After being familiar with the machine performance, it can gradually increase production speed, which can better ensure production safety and product embossing quality.

2.操作时，温度和压力的正确控制十分重要设备，若控制不好很容易发生事故，甚至可能使机器损坏。加热进行压纹定型时，可根据材料特性控制问题，一般情况下将温度控制在40-90℃之间即可，切忌采用超高温进行压纹立体印刷，以防印品变色或变形，避免辊体因受高温影响而变形。压纹时工作压力应根据印品材料的厚薄和密度情况，酌情在3-8mpa范围进行控制，切不可为追求高清晰度的压纹效果而盲目加大压力，以免因压力过重而使压力辊变形。

2. operation, the correct control of temperature and pressure is very important equipment, if the control is not good, it is easy to happen accident, even may cause the machine to damage. When heating is used for embossing, the material can be controlled according to the characteristics of materials. Generally, the temperature is controlled between 40-90 degrees. We must avoid using ultra-high temperature to embosse printing, so as to prevent printing products from discoloring or deforming, and avoid the deformation of roller body due to the influence of high temperature. The working pressure of embossing should be controlled in the range of 3-8mpa according to the thickness and density of printed material, so we must not increase the pressure blindly for the purpose of pursuing high-definition embossing effect, so as to avoid the deformation of the pressure roller due to excessive pressure.

3.注意处理好机器速度、温度和压力与压纹效果的关系。一般来说电子商务，机器速度慢、温度高、压力大时，压纹效果相对较好，但必须适度，否则，反而影响产品的压纹质量。对紧度高、挺度好的材料排版，机器压力可适当大一些。

3. care to deal with the relationship between the speed, temperature and pressure of the machine and the effect of the press. Generally speaking, the effect of embossing is relatively good when e-commerce is slow, high temperature and high pressure, but it must be moderate, otherwise, it will affect the embossing quality of the product. For material typesetting with high tightness and good stiffness, the pressure of the machine can be properly larger.