| 压纹机的保养十分重要 |
| 添加时间：2019/3/23 14:15:10 浏览次数： |
| 操作时，温度和压力的正确控制十分重要设备，若控制不好很容易发生事故，甚至可能使机器损坏。加热进行压纹定型时，可根据材料特性控制问题， When operating, the correct control of temperature and pressure is very important equipment. If the control is not good, accidents can easily occur, and even the machine may be damaged. When heating for embossing and setting, the problem can be controlled according to material characteristics. 折光压纹机利用全息激光和光学折光原理，将所需光纹图案转印到金卡纸、银卡纸、镭射彩虹素面卡纸或喷铝纸及上光白卡纸上，形成强烈折光效果， Using the principle of holographic laser and optical refraction, the refractive embossing machine transfers the required patterns to gold cardboard, silver cardboard, laser rainbow plain cardboard or sprayed aluminium paper and polished white cardboard to form a strong refractive effect. 注意处理好机器速度、温度和压力与压纹效果的关系。一般来说电子商务，压纹机速度慢、温度高、压力大时，压纹效果相对较好，但必须适度，否则，反而影响产品的压纹质量。 Attention should be paid to the relationship between machine speed, temperature and pressure and tianchuangd.89ix.comtianchuang.89ix.comtongfengqiw.89ix.comtongfengqi.89ix.com chuanxian.89ix.compvcguanjian.89ix.comembossing effect. Generally speaking, in electronic commerce, when the embossing machine is slow, high temperature and high pressure, the embossing effect is relatively good, but it must be moderate, otherwise, it will affect the embossing quality of products. 印刷后的产品豪华夺目、精美绝伦，远比普通印刷包装。它还具有成本低、防伪的特点。应用于烟盒、酒盒、药品盒、化妆盒、茶叶盒、挂历、贺卡等多种包装盒的印刷上。Printed products are luxurious and exquisite, far more than ordinary printing packaging. It also has the characteristics of low cost and anti-counterfeiting. It is used for printing cigarette boxes, wine boxes, medicine boxes, cosmetic boxes, tea boxes, calendars, greeting cards and other packaging boxes. 为防止压力辊变形，长时间停机时，一定要将网纹琨离压，其操作程序是：先将油路控制阀松开，使压力辊与花纹辊分离，然后停机。 In order to prevent the deformation of the pressure roll, it is necessary to separate the reticulated roll from the pressure when the machine is shut down for a long time. The operation procedure is to release the oil control valve first, separate the pressure roll from the pattern roll, and then stop the machine. 随即用皮带或柔软而富韧性的绳子套在滚筒上平衡抬起即可。在拆卸过程中质量控制，切忌用铁辊或其他硬物去撬、垫和碰击花纹辊表面，以防止损坏辊筒纹路。 Then a belt or a soft and tough rope is put on the drum and lifted equally. In the process of disassembly quality control, do not use iron rollers or other hard objects to pry, pad and touch the surface of the pattern roll, in order to prevent damage to the roller grain. |
| 上一页 如何为压纹机加速？ |
| 下一页 木板压纹机木板的烙花可以定做 |
Copyright © 技术支持：遨游网络