新型实木家具压纹机如何维护? |
添加时间:2019/11/23 17:07:30 浏览次数: |
1.试生产时低速运行,待熟悉机器性能后,可逐渐提高生产速度,如此可较好地保证生产安全和产品的压纹质量。 1. During the trial production, it runs at a low speed. After being familiar with the machine performance, the production speed can be gradually increased, so as to ensure the production safety and the embossing quality of the product. 2.操作时,温度和压力的正确控制十分重要设备,若控制不好很容易发生事故,甚至可能使机器损坏。加热进行压纹定型时,可根据材料特性控制问题,一般情况下将温度控制在40-90℃之间即可,切忌采用超高温进行压纹立体印刷,以防印品变色或变形,避免辊体因受高温影响而变形。压纹时工作压力应根据印品材料的厚薄和密度情况,酌情在3-8mpa范围进行控制,切不可为追求高清晰度的压纹效果而盲目加大压力,以免因压力过重而使压力辊变形。 2. During operation, the correct control of temperature and pressure is very important for the equipment. If the control is not good, it is easy to cause accidents, or even damage the machine. When heating for embossing, the problem can be controlled according to the material characteristics. In general, the temperature can be controlled between 40-90 ℃. It is forbidden to use ultra-high temperature for embossing stereo printing, so as to prevent the color change or deformation of the print and avoid the deformation of the roller body due to the influence of high temperature. When embossing, the working pressure should be controlled in the range of 3-8mpa according to the thickness and density of the printing material. Do not blindly increase the pressure to pursue high-definition embossing effect, so as to avoid the pressure roll deformation due to the excessive pressure. 3.注意处理好机器速度、温度和压力与压纹效果的关系。一般来说电子商务,机器速度慢、温度高、压力大时,压纹效果相对较好,但必须适度,否则,反而影响产品的压纹质量。对紧度高、挺度好的材料排版,机器压力可适当大一些。 3. Pay attention to the relationship between machine speed, temperature and pressure and embossing effect. Generally speaking, when the machine speed is slow, the temperature is high and the pressure is high, the embossing effect is relatively good, but it must be moderate, otherwise, it will affect the embossing quality of the product. For the layout of materials with high tightness and good stiffness, the machine pressure can be increased appropriately. |
上一页 压纹板比滚轴便宜得多 |
下一页 有效防止压纹后木纹反弹,确保压纹效果长久稳定 |
Copyright © 技术支持:遨游网络