| 定期检查压纹机的平衡状态 |
| 添加时间：2018/9/6 15:59:02 浏览次数： |
| 定期对压纹机进行水平状态检查，若发现偏斜情况要及时校平，以免零部件磨损曼罗兰，降低设备的精度和使用寿命。压纹机底座四边各有一只Φ20mm的螺丝，当机器略有不平衡时，可通过调整螺丝进行校平。应注意的是，上螺丝时用力要均匀，若受力不均重组，容易破坏机器的水平状态。 Regularly check the horizontal state of the embossing machine. If deflection is found, it should be adjusted in time so as to avoid parts wearing Manloran and reduce the accuracy and service life of the equipment. There is a 20mm screw on each side of the base of the embossing machine. When the machine is slightly unbalanced, it can be leveled by adjusting the screw. It should be noted that the upper screw force should be uniform, if the force is not uniform restructuring, easy to damage the horizontal state of the machine. |
| 上一页 实木压纹机的安装 |
| 下一页 压纹机的性能特点 |
Copyright © 技术支持：遨游网络